El Tip Jar

NewTek Studio | Interactive Demo

How To Input Network Video Sources on a TriCaster

August 28, 2015 by Chuck Baker

**by Kane Peterson, NewTek Workflow Engineer **

NetVideo_Figure279_rtsz_grabTriCaster 410, 460, 860 & 8000 feature a Network Video option located in the NET inputs menu. This IP-based feature allows you to pull video files or live video sources from across the Internet into your live production. It’s relatively easy to set up a simple network video server on a Windows PC that you can use to stream video into a NET input.

The video server acts like a simple DDR. When a video plays, it will start from the beginning, play to the end and stop. This type of network resource can be very useful for bringing essentially unlimited additional content into your productions without taking up space on your TriCaster’s drives.

Instead of having to first transfer a video file from a remote internet location, make it available on a server and TriCaster can pull the clip in as it plays. This can save valuable time, knowing you don’t have to transfer it in its entirety for it to be played. We describe this use case with a server on a LAN connected to a TriCaster; but such a server need not be on the same LAN for this to work.

You can also use an IP camera as an input, either on your LAN or across the internet.  With this technique, you can produce an event in one location and stream it, while another location pulls the stream in as a source to use in their production, perhaps rebranding and repurposing it for another audience.


One factor that must be accounted for in the above examples is that enough bandwidth needs to be available so that real-time playback can occur. This typically isn’t a problem on a local network, but as soon as you are pulling video over the internet, this becomes a critical factor that must be accounted for if this feature is to be used successfully. We won’t go into how to set up all of these examples, but after you see how this works with a local server, you will have a much better idea of how you might be able to take advantage of it.

HTTP Network Video Server Setup

Here is what you need to make this all work.

  • A TriCaster 410, 460, 860 or 8000 (updated with rev 2-2 software).
  • A Windows computer that will be running the HTTP server we will use.
  • HTTP File Server (HFS) software which can be downloaded from this http://www.rejetto.com/hfs/
  • Gigabit network between the systems being used. Download HFS and open it on the computer that will be server. HFS doesn’t have to be installed, so just put the software anywhere you want to run it from (like the desktop) and double click on it. When it opens, you will see a window similar to below.


To import clips, just drag video files from anywhere on your computer into the HFS window. You will see them appear in the middle left panel in the interface.


On TriCaster, in one of the Network inputs, open the drop down menu and choose ‘Add Network Video…’ from the list.


In the HFS application, click on a file in the middle left panel, you will see the full URL for it displayed at the top of the window. Type this URL exactly as shown into the Address field on TriCaster’s Network Video Configuration window.


When you click ‘Done’, this Network Video configuration will be added to the drop down list of both NET inputs. To play this video, click on the drop down on the NET input you want to play the video in and then choose your Network Video name from the list.


The HFS window will also report back information while the video is playing. If you look at the bottom panel of the HFS window, you can see the files that are being sent along with how much of the file is left to transmit. While this information doesn’t tell you how much time there is left to play, it will give you an idea of how much of the file has been sent and how much is left to go.


When the file is finished playing, the video will stop on the last frame. There is no autoplay-like function that will perform a transition when the end of the video clip has been reached, so you do need to be ready to perform the correct action at the end of your video. There are also no options like loop or list mode playback either. If you want to play the clip again, you must first select the ‘Disconnect’ option in the NET drop down list before you can select Network Video name again.

Macros can be very helpful for playback of Network Video sources. Build a macro that selects the correct Network Video from the drop down and assign it to a shortcut. Now you can playback this clip anytime just by pressing that shortcut.

Supported Streaming Protocols

You will notice that example URLs shown in the Network Video configuration panel, all start with “http:” or “rtmp:” or something similar. Those are the acronyms for the protocol being used to transfer the data.  Here are several protocols that you can use:

*HTTP (HyperText Transport Protocol): *Probably the protocol you are most familiar with, this is the standard protocol used by web browsers to transfer text and images when viewing web sites, but the protocol can be used to transfer anything, including video. While the protocol isn’t as optimized for real- time audio/video communication, it is commonly used for this function.

*RTMP (Real-Time Messaging Protocol): *This protocol is designed for low-latency communication. This makes it a better option for transfer of video information and is the protocol used by Flash for streaming video.

*RTP (Real-time Transport Protocol): *Another protocol designed for sending video and audio over networks.

*RTSP (Real-Time Streaming Protocol): *This is a control protocol, which in itself doesn’t transfer audio/video information, but instead sends commands to the media server (such as play, stop or pause). RTSP will use another protocol (such as RTP) to stream the video.

Operating Tips

A ‘full power’ HTTP server (Apache, IIS or nginx) can be used.  We’ve described a very simple setup here, but all the same principles apply for folks with the experience or the IT support for a high-end dedicated server.

File doesn’t play and HFS isn’t showing anything as being sent: you probably typed the URL incorrectly. You can edit a Network Video’s properties by clicking on the drop down from a NET input and then clicking on the gear next to your Network Video name. After editing the URL, select ‘Disconnect’ from the NET drop down list, then select your Network Video name again to play your video.

HFS shows a file bring transferred, but your NET input isn’t displaying or is incorrectly displaying video: your video file probably isn’t in a format that the NET input can decode correctly. While the Network Video will play back many different files types and codecs, the list of what it can play isn’t as extensive as what you can play in a DDR. For example, clips with alpha channels do not play in a Network Video correctly, while they will work in a DDR.

File is playing, but there is stuttering in the playback: your video clip’s data rate is too high for your network. You shouldn’t have a problem with playback when working over gigabit Ethernet, but if you are transmitting over 100mbit or even wireless networks then you need to make sure that you are not trying to transmit data faster than the network can handle.

More tips and tutorials by Kane Peterson:


Share this article:

Live Production Tips, Popular Stories, TriCaster, Video Production Tips,

IP Camera, IP Workflow, Live Production, Network Video, Network Video Server, Production, Tip, TriCaster,

Dónde comprar
productos NewTek

NewTek cuenta con una red de distribuidores ubicados en todo el mundo. Todos ellos tienen una amplia experiencia en nuestros productos y en la industria de producción de vídeos y streaming.

Utilice esta herramienta para encontrar a un distribuidor de NewTek cerca de su domicilio.

Localizador de distribuidores

Comuníquese con un experto en soluciones

Obtenga asesoría especializada sobre un flujo de trabajo de producción en directo en torno a sistemas NewTek y NDI o permítanos comunicarlo con uno de nuestros socios locales, nuestros expertos en soluciones están aquí para ayudarlo.

Chat with
Tech Support
Chat with a Sales Specialist